
What is the best way to clean the system of a KOHLER whirlpool?
Flush
your whirlpool system twice a month or more, depending upon
usage.
- Adjust the jets fully clockwise
so there is no air induction.
- Fill the bath with warm water
to a level 2" above the highest jets, or leave
water in the bath after using.
- Add 2 teaspoons of a low-foaming
dishwasher detergent and 20 ounces of household bleach
(5% to 6% sodium hypochlorite) to the water.
- Run the whirlpool for 5 to
10 minutes. Then shut off the whirlpool and drain
the water.
- If desired, rinse bath surfaces
with water.
- Clean
bath surfaces as needed with recommended cleaners.
Back to Top

Why is KOHLER Cast Iron considered the premier material for
plumbing fixtures?
KOHLER Cast Iron excels in strength and beauty. Cast Iron features
a thick enamel coating in a variety of colors. Fired at temperatures
much higher than is possible with enameled steel products, the cast
iron surface is "fire polished" to obtain its vivid color and deep
gloss. The thickness of cast iron makes its surface resistant to
acids, and provides outstanding protection against chipping, scratches
and dents. Because of its density, cast iron also has outstanding
heat retention properties, so water stays warm longer.
Back to Top

What are the stainless steel material and quality specifications
for KOHLER kitchen sinks?
Sinks are made from 18-gauge type 304 stainless steel with
18% chromium and 8% nickel content. These stainless steel specifications
for kitchen sinks provide exceptional resistance to stains and corrosion.
Back to Top

How large are the trapways and water surfaces for KOHLER toilets?
KOHLER toilets have the following trapways and water surfaces:
Back to Top

What is a 1pc toilet vs. 2pc toilet?
The one piece toilet is designed so the tank and bowl are cast as a single
vitreous china fixture. Typically, one-piece toilets have a lower profile
than two-piece toilets. Kohler's one-piece toilets offer some of the lowest
profiles in the industry. Two piece toilets have a separate toilet tank and
bowl secured to each other. They are also referred to as close-coupled toilets.
Many Kohler two-piece toilets offer a 3-bolt installation system which provides
a sturdy, level connection between the toilet and bowl.
Back to Top

What is the difference between Class Five and Ingenium flush?
The Class Five is designed for extraordinary bulk flushing performance.
Its large flush valve allows rapid release of water combined with a direct
fed jet and maximizes water flow. The Ingenium has a quieter, swirling flush
designed to minimize noise and clean the bowl.
Back to Top

What are the quietest flushing KOHLER toilets?
The quietest flushing toilets are one-piece gravity toilets such
as KOHLER's San Raphael,
Rialto, and Rosario.
These toilets are very quiet because flush noise is caused both
by the velocity of water flowing into the bowl, and by water refilling
the tank. Quiet toilets rely on gravity for water to flow into the
bowl. The quietest toilets are the one-piece design toilets because
these toilets flush without a large "head" pressure (water falling
a longer distance). Typically the loudest toilets are those that
use pressurized flush valves or tanks.
Back to Top

What are antimicrobial seats?
Antimicrobial seats are toilet seats with an antimicrobial agent formed into the plastic to inhibit the
growth of odor-causing bacteria, mold, and mildew.
Back to Top

Will a wax ring come with my toilet?
No, it must be purchased separately.
Back to Top

Will "T" bolts come with my toilet?
No, they must be purchased separately.
Back to Top

My toilet is running, how do I fix it?
To solve this problem, you'll want to ask the following questions:
- Is water running into the overflow tube? If so, lower/adjust the float valve.
- Is the chain too slack or too tight? Make sure the chain has only 1-2 beads of slack.
- Has the water in the home or surrounding area been recently shut off for some reason? This could cause debris to come up through the water pipes and settle into the diaphragm seal of the fill valve. Flush out the diaphragm seal. If this doesn't work, contact the Kohler Service Parts Store to order a new diaphragm seal.
Back to Top

How do you remove scratches from stainless steel sinks?
First, make sure you use a good stainless steel cleaner. Once you’re done cleaning, follow up with good stainless steel polish. Cleaning will only blend in light scratches; deep scratches may require more work or sink replacement.
Use Bar Keepers Friend cleanser and a green Scotch-Brite pad. Wet the sink and pad, and sprinkle a little cleanser in the sink. Gently move the pad front to back on the bottom to blend the scratches in. On the sides, scrub in a circular motion. Rinse thoroughly.
Back to Top

What is a tile flange?
A tile flange is usually for a tub or shower receptor only. It is
the raised area around the edge of the tub/receptor that goes right up
against the studs. Sometimes you nail/screw it to the studs. Sometimes
you don't (i.e. cast iron tubs) but they all serve the function of
helping prevent water from getting up over the edge of the tub and down
into the walls or onto the sub-floor.
Back to Top

My kitchen sprayhead is leaking from the threaded connection or, the plating is cracked or peeling. How do I replace the sprayhead?
Replacement sprayheads can be ordered online at the Kohler Service Parts Store.
Back to Top

My valve is leaking , how do I replace it?
Common replacement valves can be ordered ordered online
at the Kohler Service Parts Store.
Back to Top

My kitchen faucet side spray is not working correctly, too much water coming
out the spout when I press the side spray lever. How can this be fixed?
This condition typically requires replacement of the diverter in your faucet.
Replacement diverters can be ordered online at the Kohler Service Parts Store.
Back to Top

The plug button on my Kitchen/Lav faucet has fallen off, how do I replace it?
Replacement plug buttons can be ordered online at the Kohler Service Parts Store.
Back to Top

The aerator for may faucet has broken, the finish has deteriorated , or needs
cleaning. How do I replace or clean it?
Replacement aerators can be ordered online at the Kohler Service Parts Store.

How do you remove a faucet valve cartridge that is 'locked' into place?
This is due to calcium or mineral buildup. Soak/Spray a 50/50 solution of white vinegar and water for an extended
period of time to allow the buildup to break down and loosen.
Back to Top
|